Why the shortage on HK P30's and USP's Appreciate your work! Keep it up!
Dru Bradley | $10.70
Do you have any info on the company "DEL-TON" or cool history? Thank you both. Dru
Rollis Karvellis | $10.70
Thank you for not being a shill.
Police Chaplain Leggitt | $21.08
Do you know anything about the new Colt LE6960-CCU upper shown on page 3 of the new Brownell's master catalog 72. I'm using one on a patrol rifle with a Colt lower.
Chase | $5.50
Hello Chris, I recently purchased the 16 inch larue stealth barrel with mid-length gas. When I tried to shoot at the range, I noticed that the barrel was super overgassed （1：30 ejection pattern）. I tried using H2 buffer but sometimes bolt still will not lock back on last round. I would like to ask your opinion on the overgassed rifle solution. Should I try h3 buffer or try adjustable gas block/bcg？ Thank you
chris | $5
Looking at getting a 6.5 creedmore with a 20" barrel
Can't decide whether i want the Tikka T3X CTR or a Tikka T3X TAC A1
What are your thoughts?
Thank you very much for everything you do!
Shawn P. | $3.44
If the US had adopted the AR-10 as the M14, instead of the improved garand. Would we have transitioned to the 5.56 in the 60s? Or waited until the 80s or 90s like everyone else?
Stephen | $5
Howdy from Texas,
Would you trust an Aero Precision M4E1 as a duty rifle for law enforcement? Or their AC-15 line? I’m a new subscriber have really enjoyed the channel. Keep it up.
-Stephen
Mark | $5
I was surprised to learn Diamondback Firearms uses a pistol length gas system in their 300 Blackout ARs. Why? What are your thoughts? What are your top AR picks in this caliber?
Jimmy | $21.08
Thank you for your hard work and wishing you continued success with this initiative !
Adnan Tahir-Hussain | $5.50
Does Jeff Hoffman get certain components for his ammunition out of Northrop Grumman or Orbital ATK? Supposedly, Northrop Grumman is the largest U.S. producer of military small-caliber ammunition.
James Mc | $5.56
Which 9mm HK pistol would you choose for duty use?
James Mc | $5.56
Sprinco Green or Tubbs Flat Wire for improved A5 reliability?
steven | $3.43
Looking to get into pistol caliber carbines. Have my eyes set on a Grand Power Stribog. Do you have any experience with this weapon?
Steve Krilich | $15.89
Chris, what is the best buffer weight for a 10.5 inch .300 blackout pistol build?
Brandon | $3.43
Planning to build a 12.5 ar15 in 5.56. Would combining the Vltor A5 buffer kit with an Lmt enhanced bcg help with the carbine gas system, or would they interfere with each other tuning? Will running them require an adjustable gas block?
Ayisa Abere | $5.50
I want to put together a M5 AR10 can you recommend any reputable builders?
Manuel Jaramillo | $5
How long do buffers last in AR pattern rifles?
James Mc | $5.56
A retired SF soldier and current tactical class instructor recommends 55 gr or lighter rounds for better fragmentation out of a SBR at indoors home defense range and leave the heavier rounds for distance with longer barrels. Does this advice have merit?
James Mc | $5.56
What is a better reliability upgrade for a 14.5" carbine length gas AR, a midlength gas barrel or LMT enhanced BCG? For the cost of a new decent barrel, gas block, gas tube, and suppressor mount the costs are very close. Or maybe just the enhanced bolt with a midlength gas system?
Richard Salario | $25
Steve Krilich | $10.70
Deron | $10.70
Any thoughts, good or bad, about having a 16 inch Bartlein, Criterion barrel cut down to 13.7 or 13.9 to fit a custom build? Any idea who could perform said task.
Christoper Pulley
!No need to read on stream! Have you guys seen the new forgotten weapons video on the youtube union? might help towards youtube monetization for 2a channels. Just a recommendation that might (hopefully) help you guys. youtu.be/EUxxLZz_2NU
Andy | $5.50
I have a 2001 sig p220 and even though I’ve lubed it the anodizing on the frame rail where the slide rides keeps getting more worn in one spot near the rear. Is there anything I can do to fix this
Steve Krilich | $10.70
Donation
Joseph Anthony | $5.50
What do you think of the DPM systems (recoil springs) from Greece? I have one for my Jericho and it seems to help with recoil.
Kyle | $5.50
I swapped out my barrel on an LE6920 for an FN medium profile barrel and use an LMT enhanced bolt. I'm using a standard H buffer with a stock Colt spring. With M193, it ejects consistent, but forward at the 2 o'clock position. Is it over-gassed and should I be worried/switch to a H2 buffer?
Adnan Tahir-Hussain | $15.89
Relating to the XM-17/18 MHS program, despite the controversy surrounding SIG P-320, did they considered developing a modern/refined version of their current P-226 model instead? Since the Sig P-226, Glock 17/19, as well as the Beretta 92 has over 30 years of experience, since their inception.
Donor Wall (728)
Christopher Darr | $5
Jason
Why the shortage on HK P30's and USP's Appreciate your work! Keep it up!
Dru Bradley | $10.70
Do you have any info on the company "DEL-TON" or cool history? Thank you both. Dru
Rollis Karvellis | $10.70
Thank you for not being a shill.
Police Chaplain Leggitt | $21.08
Do you know anything about the new Colt LE6960-CCU upper shown on page 3 of the new Brownell's master catalog 72. I'm using one on a patrol rifle with a Colt lower.
Chase | $5.50
Hello Chris, I recently purchased the 16 inch larue stealth barrel with mid-length gas. When I tried to shoot at the range, I noticed that the barrel was super overgassed （1：30 ejection pattern）. I tried using H2 buffer but sometimes bolt still will not lock back on last round. I would like to ask your opinion on the overgassed rifle solution. Should I try h3 buffer or try adjustable gas block/bcg？ Thank you
chris | $5
Looking at getting a 6.5 creedmore with a 20" barrel Can't decide whether i want the Tikka T3X CTR or a Tikka T3X TAC A1 What are your thoughts? Thank you very much for everything you do!
Shawn P. | $3.44
If the US had adopted the AR-10 as the M14, instead of the improved garand. Would we have transitioned to the 5.56 in the 60s? Or waited until the 80s or 90s like everyone else?
Stephen | $5
Howdy from Texas, Would you trust an Aero Precision M4E1 as a duty rifle for law enforcement? Or their AC-15 line? I’m a new subscriber have really enjoyed the channel. Keep it up. -Stephen
Mark | $5
I was surprised to learn Diamondback Firearms uses a pistol length gas system in their 300 Blackout ARs. Why? What are your thoughts? What are your top AR picks in this caliber?
Jimmy | $21.08
Thank you for your hard work and wishing you continued success with this initiative !
Adnan Tahir-Hussain | $5.50
Does Jeff Hoffman get certain components for his ammunition out of Northrop Grumman or Orbital ATK? Supposedly, Northrop Grumman is the largest U.S. producer of military small-caliber ammunition.
James Mc | $5.56
Which 9mm HK pistol would you choose for duty use?
James Mc | $5.56
Sprinco Green or Tubbs Flat Wire for improved A5 reliability?
steven | $3.43
Looking to get into pistol caliber carbines. Have my eyes set on a Grand Power Stribog. Do you have any experience with this weapon?
Steve Krilich | $15.89
Chris, what is the best buffer weight for a 10.5 inch .300 blackout pistol build?
Brandon | $3.43
Planning to build a 12.5 ar15 in 5.56. Would combining the Vltor A5 buffer kit with an Lmt enhanced bcg help with the carbine gas system, or would they interfere with each other tuning? Will running them require an adjustable gas block?
Ayisa Abere | $5.50
I want to put together a M5 AR10 can you recommend any reputable builders?
Manuel Jaramillo | $5
How long do buffers last in AR pattern rifles?
James Mc | $5.56
A retired SF soldier and current tactical class instructor recommends 55 gr or lighter rounds for better fragmentation out of a SBR at indoors home defense range and leave the heavier rounds for distance with longer barrels. Does this advice have merit?
James Mc | $5.56
What is a better reliability upgrade for a 14.5" carbine length gas AR, a midlength gas barrel or LMT enhanced BCG? For the cost of a new decent barrel, gas block, gas tube, and suppressor mount the costs are very close. Or maybe just the enhanced bolt with a midlength gas system?
Richard Salario | $25
Steve Krilich | $10.70
Deron | $10.70
Any thoughts, good or bad, about having a 16 inch Bartlein, Criterion barrel cut down to 13.7 or 13.9 to fit a custom build? Any idea who could perform said task.
Christoper Pulley
!No need to read on stream! Have you guys seen the new forgotten weapons video on the youtube union? might help towards youtube monetization for 2a channels. Just a recommendation that might (hopefully) help you guys. youtu.be/EUxxLZz_2NU
Andy | $5.50
I have a 2001 sig p220 and even though I’ve lubed it the anodizing on the frame rail where the slide rides keeps getting more worn in one spot near the rear. Is there anything I can do to fix this
Steve Krilich | $10.70
Donation
Joseph Anthony | $5.50
What do you think of the DPM systems (recoil springs) from Greece? I have one for my Jericho and it seems to help with recoil.
Kyle | $5.50
I swapped out my barrel on an LE6920 for an FN medium profile barrel and use an LMT enhanced bolt. I'm using a standard H buffer with a stock Colt spring. With M193, it ejects consistent, but forward at the 2 o'clock position. Is it over-gassed and should I be worried/switch to a H2 buffer?
Adnan Tahir-Hussain | $15.89
Relating to the XM-17/18 MHS program, despite the controversy surrounding SIG P-320, did they considered developing a modern/refined version of their current P-226 model instead? Since the Sig P-226, Glock 17/19, as well as the Beretta 92 has over 30 years of experience, since their inception.